rftools-mcp

MCP server for rftools.io — 197 RF & electronics calculators + 13 server-side simulation tools for AI agents.

Give Claude, Cursor, or any MCP-compatible AI assistant access to validated engineering calculators and heavy server-side simulations. Microstrip impedance, link budgets, filter design, converter sizing, antenna patterns, and 190+ more calculators — plus NEC2 antenna simulation, FDTD, Monte Carlo, SMPS analysis, EMI estimation, and more, all callable as MCP tools.

Quick Start

Calculators work with no API key. For simulation tools, sign up at rftools.io and generate an API key from your dashboard.

Setup

Without API key — calculators only

All 197 calculators run locally with no sign-up required.

With API key — calculators + simulation tools

Sign up at rftools.io and generate an API key from your dashboard. Free accounts include 5 simulation runs/month. Pro: 100/month. API tier: 10,000/month.

Claude Desktop

Add to ~/Library/Application Support/Claude/claude_desktop_config.json (macOS) or %APPDATA%\Claude\claude_desktop_config.json (Windows):

{
  "mcpServers": {
    "rftools": {
      "command": "npx",
      "args": ["-y", "rftools-mcp"],
      "env": {
        "RFTOOLS_API_KEY": "rfc_your_key_here"
      }
    }
  }
}

Omit the env block to use calculators only. Restart Claude Desktop after saving.

Claude Code

claude mcp add rftools-mcp -- npx -y rftools-mcp

To add your API key:

claude mcp add rftools-mcp -e RFTOOLS_API_KEY=rfc_your_key_here -- npx -y rftools-mcp

Cursor

Add to .cursor/mcp.json in your project:

{
  "mcpServers": {
    "rftools": {
      "command": "npx",
      "args": ["-y", "rftools-mcp"],
      "env": {
        "RFTOOLS_API_KEY": "rfc_your_key_here"
      }
    }
  }
}

Windsurf

Add to ~/.codeium/windsurf/mcp_config.json:

{
  "mcpServers": {
    "rftools": {
      "command": "npx",
      "args": ["-y", "rftools-mcp"],
      "env": {
        "RFTOOLS_API_KEY": "rfc_your_key_here"
      }
    }
  }
}

Tools

Calculator tools — no API key required

`list_calculators`

List available calculators, optionally filtered by category.

"List all RF calculators"
"What antenna calculators are available?"
"Show me power electronics calculators"

Parameters:

category (optional): rf, pcb, power, signal, antenna, general, motor, protocol, emc, thermal, sensor, unit-conversion, audio

`get_calculator_info`

Get detailed info about a calculator — inputs with units/defaults, outputs, and the formula used.

"What inputs does the microstrip impedance calculator need?"
"Show me the buck converter calculator parameters"

Parameters:

slug (required): Calculator identifier (e.g. "microstrip-impedance")

`run_calculation`

Run a calculator with specific inputs. Returns results with units and a link to the interactive version on rftools.io. Runs locally — instant, no quota consumed.

"Calculate microstrip impedance for a 0.3mm trace on 0.2mm Rogers RO4003C"
"What's the link budget for a 2.4 GHz link over 500m?"
"Size a buck converter: 12V in, 3.3V out, 2A"

Parameters:

slug (required): Calculator identifier
inputs (required): Object with input values, e.g. {"traceWidth": 0.3, "substrateHeight": 0.2}

Simulation tools — API key required

Server-side jobs that are too heavy for in-browser computation. Jobs run on shared compute (free tier) or a priority queue (Pro/API tier). Simulations typically complete in 15–120 seconds; queue wait may add additional time.

Quota: Free: 5 runs/month · Pro: 100/month · API tier: 10,000/month

`list_simulation_tools`

List all 13 available simulation tools with their jobType identifiers and parameter reference.

"What simulation tools are available?"
"Show me the RF simulation tools"

`run_simulation`

Submit a simulation job and wait for the result. Returns the full result JSON along with a link to the interactive results page on rftools.io.

"Synthesize a broadband matching network from 50Ω to 200Ω between 800–1200 MHz"
"Run a Monte Carlo tolerance analysis on a 2nd-order Butterworth low-pass filter at 1 GHz"
"Simulate a 3-element Yagi antenna at 144 MHz"
"Estimate radiated emissions from a 10cm trace carrying 50mA at 100 MHz"
"Run SMPS control loop stability analysis on my buck converter"

Parameters:

jobType (required): Job type identifier — use list_simulation_tools to see all valid values
params (required): Simulation parameters — use list_simulation_tools to see required params per job type

Available simulation tools:

Tool	`jobType`
Broadband Impedance Matching Synthesizer	`impedance_match`
RF Filter Monte Carlo Tolerance Analysis	`filter_monte_carlo`
Eye Diagram Generator	`eye_diagram`
NEC2 Wire Antenna Simulator	`antenna_sim`
S-Parameter Analysis Pipeline	`sparam_pipeline`
FDTD S-Parameter Simulator	`fdtd_sparam`
SMPS Control Loop Stability Analyzer	`smps_control_loop`
EMI Radiated Emissions Estimator	`emi_radiated`
Magnetics Optimizer (NSGA-II)	`magnetics_optimizer`
Radar Detection Probability Calculator	`radar_detection`
PDN Impedance Analyzer	`pdn_impedance`
Satellite Link Budget (ITU-R)	`sat_link_budget`
RF Cascade Budget with Monte Carlo	`rf_cascade`

Example Conversations

PCB Design

You: I need a 50-ohm microstrip on 1.6mm FR4 with 1oz copper. What trace width?

AI: Calls run_calculation with microstrip-impedance → A trace width of ~2.9mm gives you 50.2 Ω on 1.6mm FR4 (εr=4.2). View on rftools.io →

RF Link Budget

You: Will my 100mW 915 MHz LoRa link work at 2km with 3dBi antennas?

AI: Calls run_calculation with rf-link-budget → Received power: -72 dBm. With LoRa sensitivity at -137 dBm, you have 65 dB of link margin. Easily workable. View on rftools.io →

Power Electronics

You: Design a buck converter: 24V input, 5V output, 3A load, 500kHz switching.

AI: Calls run_calculation with buck-converter → Duty cycle: 20.8%, inductor: 17.4 μH, output cap: 22 μF. View on rftools.io →

All 197 Calculators

Category	Count	Examples
RF & Microwave	21	Microstrip impedance, VSWR/return loss, Smith chart, link budget, noise figure cascade, radar range, free-space path loss
PCB Design	14	Trace width for current, differential pair, controlled impedance, via calculator, crosstalk, decoupling capacitor
Power Electronics	18	Buck converter, boost converter, flyback, LDO thermal, battery life, MOSFET dissipation, solar panel sizing
Signal Processing	14	Filter designer, ADC SNR, FFT bin resolution, PLL loop filter, BER/SNR, Johnson noise
Antenna Design	8	Dipole, patch, Yagi-Uda, horn, parabolic dish, loop, EIRP, beamwidth
General Electronics	16	Ohm's law, op-amp gain, 555 timer, BJT bias, MOSFET operating point, Schmitt trigger, crystal load capacitance
Motor Control	17	DC motor speed, stepper, BLDC, servo, PID tuning, gear ratio, H-bridge selection
Communications	10	UART baud rate, I2C pull-up, SPI timing, CAN bus, USB termination, RS-485, Ethernet, Modbus
EMC/EMI	14	Shielding effectiveness, EMI filter, ferrite bead, ESD/TVS diode, radiated emission estimate, common-mode choke
Thermal	6	Heatsink calculator, junction temperature, thermal via array, PCB trace temperature
Sensor Interface	17	NTC thermistor, RTD, thermocouple, Wheatstone bridge, load cell, photodiode, 4-20 mA loop transmitter
Unit Conversion	17	dBm↔Watts, frequency↔wavelength, AWG wire, capacitor code, temperature, inductance, data rate
Audio Electronics	17	Speaker crossover, room modes, headphone power, class-D efficiency, audio transformer, equalizer Q

Why Use This Instead of Asking the AI to Calculate?

LLMs are unreliable at arithmetic. They may:

Use simplified formulas that omit corrections (e.g. copper thickness in microstrip)
Confuse units (mils vs mm, dBm vs dBW)
Accumulate rounding errors
Confidently present wrong answers

This MCP server calls the exact same validated calculator code that runs on rftools.io. Hammerstad-Jensen for microstrip, Friis for path loss, exact dB/linear conversions — real engineering formulas, not LLM approximations.

How It Works

Calculators are bundled as pure TypeScript functions — no API calls, no network latency, no rate limits. The AI calls the function directly and gets instant results.

AI Agent ←stdio→ rftools-mcp ←direct call→ calculator function

Simulation tools run server-side on rftools.io infrastructure (AWS Lambda + SQS + Fargate). The MCP server submits the job and polls until the result is ready, then returns the full result JSON inline.

AI Agent ←stdio→ rftools-mcp ←HTTPS + API key→ rftools.io API → SQS → worker
                                ←poll /jobs/{id}←
                                ←result JSON←

Machine-Readable Documentation

rftools.io/llms.txt — Summary with API info and MCP setup
rftools.io/llms-full.txt — Complete listing of all 197 calculators with inputs, outputs, units, and URLs

License

MIT

rftools

Quick Install

rftools-mcp

Quick Start

Setup

Without API key — calculators only

With API key — calculators + simulation tools

Claude Desktop

Claude Code

Cursor

Windsurf

Tools

Calculator tools — no API key required

`list_calculators`

`get_calculator_info`

`run_calculation`

Simulation tools — API key required

`list_simulation_tools`

`run_simulation`

Example Conversations

PCB Design

RF Link Budget

Power Electronics

All 197 Calculators

Why Use This Instead of Asking the AI to Calculate?

How It Works

Machine-Readable Documentation

Links

License

Reviews